Suprit Enterprises

These are efficient in their use partly due to the ability to recover and reuse the excess overspray from the coating booths. The recovery system consists of three components: the booth which contains the excess powder, the collector which retrieves the excess, and the filters which clean and return the air.

The salient feature of the product we offer are:

• We offer Powder recovery through Single cyclone and Multi cyclones or pulse jet system.
• Separates the powder from the air stream exhaust
• Allows for a maximum retrieval rate of over sprayed powder
• Permits a central collection area to reintroduce reclaim powder into the virgin powder
• Fabricated using genuine raw material and powder coated.
• All our products are widely appreciated for their attributes such as low maintenance, excellent performance, superior quality and long lasting performance.
• State of the Art powder collection gives maximum powder recovery and cost savings in addition to clean & safe work environment.

Price range :-
2 - 3 Lakhs per Unit

It is a type of coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint which is delivered via an evaporating solvent, powder coating is typically applied electrostatically and then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating application process majorly includes Cleaning, Water dry off, Coating & Curing of articles. It is mainly used for coating of metals, such as household appliances, aluminum extrusions, drum hardware, electronic, sheet metal, automobile and bicycle parts.

The salient feature of the product we offer are:

• We are engaged in providing out clients with a wide range of Powder Coating Plant such as Manual, Semi-automatic & Automatic plants.
• We offer total solutions from design, manufacturing, installation and commissioning of tailor-made systems
• We are Cost effective and highly efficient powder coating plant manufacturers
• Our offered system is Compliance with  environmental regulations as very little or no amount of volatile organic compounds (VOC) is released in atmosphere 

Fully Powder coating plants includes major component / equipment as:

• Pre Treatment Unit with transporter
• Water Drying Oven
• Powder Coating Booth with auto spray application & reciprocators 
• Powder recovery system using Multi-cyclone or high efficiency Single cyclone system and AFU
• Powder Curing Oven with electrical or gas fired heating options based on the requirements
• Overhead Conveyor for material handling through above system, based on the requirements

Some of the key benefits are:

• Thicker coatings than conventional liquid coatings without running or sagging
• Wide range of special effects can be easily accomplished
• Powder coated parts will be highly resistant to wear and tear, corrosion resistance, chemical resistance,  heat resistance etc.
• Curing time is faster 

Price Range :-
12 - 30 Lakhs per unit

The enclosed insulated chamber is provided with air circulating blowers & heating system. The air is circulated in the chamber to increase & distribute even temperature in all over area. The cure oven is designed to provide the product curing requirements such as time & temperature. The curing process is accomplished by holding the articles on conveyor / carriers in the oven at certain temperature for a certain length of time until the desired quality is met.

There are various kinds of oven, it includes the following:

• Batch Type Oven: Articles presented on trolley inside oven. After backing , trolley is taken out.
• Conveyorised Conventional Oven: Conveyor carries article in the chamber & travels for decided time to get powder cured. Conveyor brings the article continuously from the oven.
• Conveyorised Camel Back Oven: Same as per conveyorised conventional oven. The article entry & exit is Provide a cut out parallel to the ground to avoid heat loss

The salient feature of the product we offer are:

• Powder curing oven generally consists of furnace body, heating chamber, burner, circulating fan, hot air circulation pipeline system, exhaust pipeline and control system.
• We offer batch type as well as fully automatic conveyorised powder curing ovens.
• Robust structural construction and component in addition to Heavy duty thermal insulation is being used in our product
• Our offered product comes with electrical, oil fired & gas fired heating system.
• Curing ovens designed to cause a chemical reaction in a substance once a specific temperature is reached
• Factory tested to ensure on time delivery and field start up. 

Price Range :-
6 - 9 Lakhs per unit

It is an enclosure that is designed to contain the powder application process. A recovery system is attached to the powder coating booth. These booths are designed to accommodate automatic and manual equipment based on the system parameters.

The salient feature of the product we offer are:

• Fabricated enclosure of MS or SS to spray powder
• The enclosure is provided with powder Recovery systems ( monocyclone / multi-cyclone. )
• AFU (After Filter Unit) is suggested for further separation of powder particles which has exhausted from cyclone.
• We offer fully automatic system and batch type powder coating booth.
• The booth size varies depending on the capacity requirements, item type and size of the articles.
• Our product is designed to increase your productivity, product quality and profitability in powder coating applications.
• We also offer the powder coating spray guns & reciprocators for auto spraying system

General type of Powder coating booths are:

• Back to back operator

• Automated booth
• Single operator booth

Price Range :- 
3 - 5 Lakhs per unit

It is a type of coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint which is delivered via an evaporating solvent, powder coating is typically applied electrostatically and then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating application process majorly includes Cleaning, Water dry off, Coating & Curing of articles. It is mainly used for coating of metals, such as household appliances, aluminum extrusions, drum hardware, electronic, sheet metal, automobile and bicycle parts.

The salient feature of the product we offer are:

• We are engaged in providing out clients with a wide range of Powder Coating Plant such as Manual, Semi-automatic & Automatic plants.
• We offer total solutions from design, manufacturing, installation and commissioning of tailor-made systems
• We are Cost effective and highly efficient powder coating plant manufacturers
• Our offered system is Compliance with  environmental regulations as very little or no amount of volatile organic compounds (VOC) is released in atmosphere 

Fully Powder coating plants includes major component / equipment as:

• Pre Treatment Unit with transporter
• Water Drying Oven
• Powder Coating Booth with auto spray application & reciprocators 
• Powder recovery system using Multi-cyclone or high efficiency Single cyclone system and AFU
• Powder Curing Oven with electrical or gas fired heating options based on the requirements
• Overhead Conveyor for material handling through above system, based on the requirements

Some of the key benefits are:

• Thicker coatings than conventional liquid coatings without running or sagging
• Wide range of special effects can be easily accomplished
• Powder coated parts will be highly resistant to wear and tear, corrosion resistance, chemical resistance,  heat resistance etc.
• Curing time is faster 

Price Range :-
12 - 30 Lakhs per unit

This ensure that moisture is thoroughly removed from a part before it is painted, powder-coated, or finished. This drying process is important since materials or parts that undergo powder coating are electrostatically charged and sprayed with finely ground particles / Powder. The drying process is accomplished by holding the articles on conveyor in the oven until the desired drying time is met. Without proper drying in the oven, the finish will not properly adhere to the part.

The salient feature of the product we offer are:

• Water dry-off oven consists of furnace body, heating chamber, burner, circulating fan, hot air circulation pipeline system, exhaust pipeline and control system.
• Dry-off ovens that energy-efficient operate at a lower heat compared to a curing oven.
• Batch type & Continuous type ovens are provided as per requirements.
• The offered products come with electrical heating system or HSD/ Gas fired heating system. 
• Robust structural oven frames and component supports.
• Factory tested to ensure on time delivery and field start up. 
• Water dry-off oven will help to displace cupped water, remove water vapour, and eventually dehydrate the water found on the products

Price Range :-
5 - 7 Lakhs per Unit